Drag the file here
or
Electric Branding Iron Complete 150x80mm
Buy your new Electric Branding Iron here with interchangeable rectangular brass plate size 150x80mm for stamping on your work/creations or on different surfaces.
RECOMMENDATIONS FOR USE:
- Heat the stamp for about 10 to 15 minutes , but be careful: make sure that the hotplate is neither too hot (it could melt the material on which the stamp rests) nor too cold (the stamping would not be optimal)
- Do not place the plate abruptly on the surface but accompany it smoothly
- Once it is in contact with the surface, wait 2-3 seconds, this is the correct length of time to obtain a defined and sharp impression
- Stamp on clean surfaces, without stains and unevenness
- Make sure that the logo that will later be printed on the stamp plate is a clear image without too many colour gradients, because the impression would not be so clear once the stamp is applied. We therefore recommend creating a solid logo or one with clearly defined contours.
- Use suitable lettering csuch as capital letters and lowercase letters, pay attention to italic fonts (if the logo has text)
- If you need a greater quality and consistency result, we recommend you purchase a power regulator
The product is not certified for food use. POWER is 1000 Watts and it works at a temperature of 400-450°C.
Select the uploadfunction to upload the file ready for the realisation; we recommend the upload of a VECTOR FILE.
It is usually shipped in 2/3 working days.
The heating element is considered a consumable part and as such is not covered by warranty. It is available as a spare part on our website.
Our customer service is at your disposal for any need, doubt or question.
RECOMMENDATIONS FOR USE:
- Heat the stamp for about 10 to 15 minutes , but be careful: make sure that the hotplate is neither too hot (it could melt the material on which the stamp rests) nor too cold (the stamping would not be optimal)
- Do not place the plate abruptly on the surface but accompany it smoothly
- Once it is in contact with the surface, wait 2-3 seconds, this is the correct length of time to obtain a defined and sharp impression
- Stamp on clean surfaces, without stains and unevenness
- Make sure that the logo that will later be printed on the stamp plate is a clear image without too many colour gradients, because the impression would not be so clear once the stamp is applied. We therefore recommend creating a solid logo or one with clearly defined contours.
- Use suitable lettering csuch as capital letters and lowercase letters, pay attention to italic fonts (if the logo has text)
- If you need a greater quality and consistency result, we recommend you purchase a power regulator
The product is not certified for food use. POWER is 1000 Watts and it works at a temperature of 400-450°C.
Select the uploadfunction to upload the file ready for the realisation; we recommend the upload of a VECTOR FILE.
It is usually shipped in 2/3 working days.
The heating element is considered a consumable part and as such is not covered by warranty. It is available as a spare part on our website.
Our customer service is at your disposal for any need, doubt or question.
Customize your product
Upload the file in the dedicated field.
Check that the file has a minimum resolution of 600 dpi.
Make sure the format is black and white: it is not possible to insert objects and writings in color or in grayscale, nor scans or photographs of stamps.
The accepted vector formats are: EPS, AI, CDR, PDF, JPEG, PNG and BMP
We are available in case of difficulty in creating the graphics.
Check that the file has a minimum resolution of 600 dpi.
Make sure the format is black and white: it is not possible to insert objects and writings in color or in grayscale, nor scans or photographs of stamps.
The accepted vector formats are: EPS, AI, CDR, PDF, JPEG, PNG and BMP
We are available in case of difficulty in creating the graphics.
Analyzing file...
Product reviews
Quote total
Type
Unit price
Subtotal without tax
VAT 0%
Customize your product to proceed